🦖 How Do Bi Xenon Headlights Work

Even without the parts to get the swiveling/leveling, just purchasing the OEM headlight housing for the bi-xenon's would set you back at least $1000. OEM headlight housings are expensive, even if you were just getting replacement halogen housings. U. Features of Projector Headlights. 1. Bulb. A projector headlight utilizes a single bulb in place of the two bulbs used in a traditional dual-beam design (one for a high beam and one for a low beam). Most projector headlights use HID Xenon bulbs. However, halogen and, more recently, LED systems are also available. 2. Bi-xenon headlights are also equipped with an adaptive headlight control system, which uses stepper motors to rotate the headlights slightly as the front wheels are steered, providing an enhanced lighting path as the vehicle travels through a turn. Then I read that you should take all the parts (the bulb, the ballast, and the ignitor) and move them to the side that is working until you find the problem. So I took the bumper off (pain in the ass) took both lights out, and moved the ballast (control module, or whatever you want to call it) over to the passenger side, and sure enough that Take a volt meter and find out. Put your lights on, test one light, then switch to high, test it again.. find the two that are positive and just reverse them, i had to do this on my truck also. B. BigBoy30 Discussion starter. 189 posts · Joined 2007. jinzo. I am trying another retrofit on a VW Tiguan MY2012 from Halogen to Bi-Xenon. As I did some experiments, currently I have an ugly brick T14/10 and T14/12 and LEDs work, main beams work, high beams do not work. From my understanding and checks everything should be wired correctly and T14/11 is the Shutter and goes to T52c/46 as per WD for http://www.volvotips.com is the ultimate Volvo website which will contain all info about classic Volvos! If you need any parts manuals, hints and tips or ser BI-Xenon Morimoto Mini H1 Retrofit Kit: TMaXu.

how do bi xenon headlights work